Chinese translation for "weld length"
|
- 焊缝长度
焊接长度
熔接长度
Related Translations:
length: n.1.长，长度，长短。2.(时间的)长短，期间。3.(赛艇的)一艇的长度；一马的长度。4.程度，范围。5.【板球】球程；投至适当距离的球。6.【语言学】音长。7.一段，一节。短语和例子a dress length, a length of cloth 一段料。 a length of pipe [tubing] 一节管子。 The boat won by three le
- Example Sentences:
| 1. | The welding technology of francis turbine runners is optimized from the view of subsection welding and local heating by numerical simulation . the result shows that welding residual tensile stress appears in the weld and its area nearby , and peak stress appears in the dangerous area of blades after practising quondam welding technology ; welding residual tensile peak stress in the dangerous area of blades can be decreased by welding both ends earlier and then welding middle section later during subsection welding , and decreasing effect on welding residual stress of the subsection welding is related to the weld length of blade outlets and welding direction of each subsection ; decreasing effect on residual stress of the local heating is direct proportional to heating time , heating temperature , heating area , and inversely proportional to cooling area , and welding residual tensile peak stress in the dangerous area is decreasing trend earlier , and then increasing trend later with heated location increased
本文利用数值模拟手段对转轮的焊接工艺从分段焊和局部加热两个方面进行了优化,结果表明:采用普通工艺焊接时,叶片焊后残余拉应力出现在焊缝及其附近区域,并且在叶片出水边的熔合线附近(危险区域)出现了峰值;在采用优化的分段焊时,先焊两端后焊中间的方法可以降低叶片危险区域的焊接残余拉应力峰值,降低效果与叶片出水边焊段长度、焊缝各段的焊接方向有关;局部加热法降低转轮危险区域残余应力的效果主要与加热时间、加热温度以及加热面积成正比,与冷却面积成反比,并且危险区域的残余应力随加热区域的增大呈先降低后升高的趋势。 |
- Similar Words：
- "weld junction" Chinese translation, "weld latter" Chinese translation, "weld layer" Chinese translation, "weld layers" Chinese translation, "weld leg" Chinese translation, "weld line" Chinese translation, "weld lines" Chinese translation, "weld machined flush" Chinese translation, "weld male connector-assembly" Chinese translation, "weld male connector-body" Chinese translation
|
|
|
